Intern - Neonjet EN Installation- and training report

Installation- and Training Report

Neonjet UV Printers MTNJF-ENV01

Date/Time

CUSTOMER INFORMATION

Details about the meeting

Contact

Company

Phone

Your Neonjet-System

Serial Number

Modico Technician

Please note: Technician and customer go through this document together. A separate installation and training report is required for each individual device purchased.

TRAINING PARTICIPANTS

Surname / First name

Company

SPOT COLOUR MAPPING

SCOPE OF DELIVERY

Please tick as appropriate

UV printing system as ordered

UV printing ink set (8 bags)

USB stick with software and USB dongle

Rotax round pressure adapter (only 0306UV VR and Neonjet XXL)

One vacuum printing table and one standard table (0306UV and Neonjet XLX only)

Anderes:

INSTALLATION AND CONFIGURATION

USER TRAINING PRINTING SYSTEM

(by technician and customer)

The customer was taught the following techniques and content:

Overview and function of connections and buttons (table movement buttons and multipurpose buttons) -> Video: https://t1p.de/1aeao

Shake up the printing ink before starting the machine, only close the ink taps if the printing system has been idle for a long time -> Video: https://t1p.de/1aeao

Overview of the information shown on the display.

Importance of the nozzle test and how often/when it should be carried out. -> Video: https://t1p.de/1iwjh

Setting the intensity of the UV lamp. -> Video: https://t1p.de/125t8

Test run of the automatic height adjustment (CAUTION with curved and transparent workpieces). -> Video: https://t1p.de/0e24k

Explanation of the zero point concept (notes: marked zero point, protective film on the table, perforation of the film on the vacuum table). -> Video: https://t1p.de/s9axk

Positioning of workpieces on the printing table (ruler with guides, templates, files with masks) -> Video: https://t1p.de/s9axk

Risk of colour turbulence and contamination on workpieces from 10 mm in height without the use of frames.

USER TRAINING COLORPlus RIP SOFTWARE

(by technician and customer)

USER TRAINING FOR ROTARY PRINTING, VACUUM TABLE AND ACCESSORIES

(by technician and customer)

Notes:

Installation and training successfully completed.

_____________________________________________________________

Stamp/signature customer